2013 Subaru Outback R LimitedFACTORY OEM SERVICE PROCEDURE

Electrical Specification: Notes

Fig 1: Identifying AT Shift Lock Control System Connector Terminals
G08578374Courtesy of SUBARU OF AMERICA, INC.
Item Connector No. Terminal No. Input/Output signal
Measured value and measuring conditions
Battery power supply B281 6 9 - 16 V
i84 6
Ignition power supply i171 17 9 - 16 V when ignition switch is at ON or START.
25 9 - 16 V when ignition switch is at ACC.
TCM ("P" range) B281 20 Pulse signal (CAN communication)
28
Stop light switch B280 10 9 - 16 V when stop light switch is ON.
Less than 1.5 V when stop light switch is OFF.
"P" range switch B281 21 Less than 1.5 V when select lever is in "P" range.
9 - 16 V when select lever is in other positions than "P" range.
Solenoid unit output B281 5 8.5 - 16 V when shift lock is released.
Less than 1.5 V when shift lock is operating.
Key warning switch signal (Model without push button ignition switch) B280 4 9 - 16 V when key is inserted.
Less than 1.5 V when key is removed.
Key lock solenoid output (Model without push button ignition switch) B281 3 7 - 14 V (unlock) (1)
4 7 - 14 V (lock) (1)
Ground B280 1 1 V or less
B281 31
i84 1
i171 29
(1) Measuring condition
Key warning switch "P" range switch Ignition switch Output
OFF - - Unlock (Key can be removed)
ON OFF - Lock (Key cannot be removed)
ON ON OFF Unlock
ON ON ON Lock
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.