Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Subaru Outback Base, Standard TransFACTORY OEM SERVICE PROCEDURE
Body Control System DTCS
BODY CONTROL SYSTEM DIAGNOSTIC TROUBLE CODES (DTC) LIST
| DTC | Description | Reference |
|---|---|---|
| None | Subaru Select Monitor communication is open or shorted. | Refer to LAN(diag)-48, COMMUNICATION FOR INITIALIZING IMPOSSIBLE, DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC) . |
| B1100 | Body integrated unit internal error | Refer to , DTC B1100 INTEG. UNIT SYSTEM ERROR , DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC) . |
| B1101 | Voltage malfunction caused by poor contact of battery power supply control circuits | Refer to , DTC B1101 BATT P/SUPPLY MALFUNCTION CONT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1102 | Voltage malfunction caused by poor contact of battery power supply backup circuits | Refer to , DTC B1102 BATT P/SUPPLY MALFUNCTION BACKUP , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1103 | Voltage malfunction caused by poor contact of IGN power supply circuits | Refer to , DTC B1103 IGNITION POWER FAILURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1104 | Voltage malfunction caused by poor contact of ACC power supply circuits | Refer to , DTC B1104 ACC POWER FAILURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1106 | Voltage malfunction caused by poor contact of shift lock circuits | Refer to , DTC B1106 SHIFT LOCK CIRCUIT FAILURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1401 | Malfunction related immobilizer | Refer to , DTC B1401 M COLLATION NG , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1402 | Malfunction related immobilizer | Refer to , DTC B1402 IMMOBILIZER KEY COLLATION NG , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1403 | Malfunction related immobilizer | Refer to , DTC B1403 E/G REQUEST NG , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1405 | Malfunction related immobilizer | Refer to , DTC B1405 SCU COLLATION NG , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1406 | Malfunction related immobilizer | Refer to , DTC B1406 SCU_EEPROM_NG , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| B1500 | Open or short circuit in keyless UART circuit | Refer to , DTC B1500 KEYLESS UART COM. MALFUNCTION , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.