2012 Subaru Outback Base, Automatic CVT TransFACTORY OEM SERVICE PROCEDURE

Seat Belt System: General Description: Caution

  • Before starting the work, turn the ignition switch to OFF, disconnect the battery ground cable and wait for 60 seconds or more.
  • The pretensioner system is fitted with a backup power supply. After disconnecting the battery ground cable, the pretensioner may operate if you do not wait for 60 seconds or more before starting pretensioner system servicing.
  • Do not drop or apply any impact to the pretensioner.
  • If oil, grease or water gets on the pretensioner, wipe it off immediately with a dry cloth.
  • Do not expose the pretensioner to high temperature or flame.
  • Do not allow current to flow through or voltage to reach the pretensioner. Do not use a circuit tester to check resistance of the pretensioner.
  • Do not disassemble or attempt to repair the pretensioner. If it is dented, cracked or deformed, replace it with a new genuine part.
  • Do not use the airbag or pretensioner parts from other vehicles. Always use a new genuine part for replacement.
  • When handling a seat belt with deployed pretensioner, wear gloves and goggles. Wash your hands afterwards.
  • Do not reuse a seat belt with deployed pretensioner.
  • Before disposal, make sure to perform an operation process to the pretensioners.
  • If material from the pretensioner enters the eyes or contacts skin during operation process, wash it away with clean water, and then consult a doctor.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.