2011 Subaru Outback RFACTORY OEM SERVICE PROCEDURE

Parking Brake DTCS

PARKING BRAKE DIAGNOSTIC TROUBLE CODES (DTC) LIST

DTC Description Reference
C0221 Parking switch malfunction Refer to , DTC C0221 PARKING POSITION SWITCH , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0222 Hill hold switch malfunction Refer to , DTC C0222 HILL HOLD SWITCH CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0231 Malfunction signal reception from ECM Refer to , DTC C0231 ECM FAILURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0232 Malfunction signal reception from TCM Refer to , DTC C0232 AT ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0233 Malfunction of neutral position switch, back-up light switch Refer to , DTC C0233 MT SHIFT SWITCH CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0234 Malfunction signal reception from VDC CM Refer to , DTC C0234 VDC FAILURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0235 No match of IGN input Refer to , DTC C0235 IGNITION SWITCH CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0241 Parking brake control module is faulty. Refer to , DTC C0241 ELECTRICAL CONTROL MODULE , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0242 Parking brake control module power supply voltage is faulty. Refer to , DTC C0242 POWER SUPPLY VOLTAGE FAILURE , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
Parking brake control module inner power supply voltage is faulty. Refer to , DTC C0242 INTERNAL POWER SUPPLY VOLTAGE ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0243 Parking brake control module parameter selection failure Refer to , DTC C0243 PARAMETER SELECTION ERROR , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0251 Actuator line of parking brake control module is faulty. Refer to , DTC C0251 ACTUATOR LINE (ABNORMAL) , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0252 Motor malfunction of parking brake control module Refer to , DTC C0252 MOTOR MALFUNCTION , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0253 Actuator stroke excess Refer to , DTC C0253 ACTUATOR STROKE EXCESS , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0261 Defective CAN communication Refer to , DTC C0261 IMPROPER CAN COMMUNICATION , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0262 CAN signal not received from TCM Refer to , DTC C0262 TCM COMMUNICATION CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0263 CAN signal not received from ECM Refer to , DTC C0263 ECM COMMUNICATION CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0264 CAN signal not received from VDC CM Refer to , DTC C0264 VDC COMMUNICATION SYSTEM , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0265 CAN signal not received from body integrated unit Refer to , DTC C0265 BODY INTEGRATED MODULE COMMUNICATION CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0267 CAN signal not received from combination meter Refer to , DTC C0267 METER COMMUNICATION SYSTEM , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0271 Defective force sensor Refer to , DTC C0271 FORCE SENSOR LINE (ABNORMAL) , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0272 Defective temperature sensor Refer to , DTC C0272 TEMPERATURE SENSOR LINE (ABNORMAL) , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0273 Defective stroke sensor Refer to , DTC C0273 STROKE SENSOR LINE (ABNORMAL) , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0274 Defective clutch sensor Refer to , DTC C0274 CLUTCH SENSOR CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0275 Defective longitudinal G sensor Refer to , DTC C0275 LONGITUDINAL G SENSOR CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0281 Stop in the middle of stroke while actuator operation Refer to , DTC C0281 MID STOP CONDITION , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
C0282 Perform the emergency cancel. Refer to , DTC C0282 EMERGENCY CANCEL STATUS , Diagnostic Procedure with Diagnostic Trouble Code (DTC).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.