Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Subaru Outback RFACTORY OEM SERVICE PROCEDURE
LAN System DTCS
LAN DIAGNOSTIC TROUBLE CODES (DTC) LIST
| DTC | Description | Reference |
|---|---|---|
| None | Subaru Select Monitor communication is open or shorted. | Refer to , COMMUNICATION FOR INITIALIZING IMPOSSIBLE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1201 | High speed CAN communication error | Refer to , DTC U1201 CAN-HS COUNTER ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1202 | Communication of some module is shut down. | Refer to , DTC U1202 CAN-HS BUS OFF , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1211 | Received error data from ECM. | Refer to , DTC U1211 CAN-HS ECM DATA ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1212 | Received error data from TCM. | Refer to , DTC U1212 CAN-HS TCM DATA ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1213 | Received error data from VDC module. | Refer to , DTC U1213 CAN-HS VDC DATA ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U121A | Received error data from meter. | Refer to , DTC U121A CAN-HS METER UNIT DATA ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U121B | Received error data from A/C module. | Refer to , DTC U121B CAN-HS A/C DATA ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U121C | Received error data from SCU. | Refer to , DTC U121C CAN-HS SCU DATA ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1219 | Received error data from EPB module. | Refer to , DTC U1219 CAN-HS EPB DATA ABNORMAL , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1221 | Not received data from ECM. | Refer to , DTC U1221 CAN-HS ECM NO-RECEIVE DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1222 | Not received data from TCM. | Refer to , DTC U1222 CAN-HS TCM NO-RECEIVE DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1223 | Not received data from VDC module. | Refer to , DTC U1223 CAN-HS VDC NO-RECEIVE DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U122A | Not received data from meter. | Refer to , DTC U122A CAN-HS METER NO-RECEIVE DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U122B | Not received data from A/C CM. | Refer to , DTC U122B CAN-HS A/C NO-RECEIVE DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U122C | Not received data from SCU. | Refer to , DTC U122C CAN-HS SCU NO-RECEIVE DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
| U1229 | Not received data from EPB module. | Refer to , DTC U1229 CAN-HS EPB NO-RECEIVE DATA , Diagnostic Procedure with Diagnostic Trouble Code (DTC). |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.