2011 Subaru Outback R PremiumFACTORY OEM SERVICE PROCEDURE

Normal Control

During normal driving, connecting force of multi-plate clutch (LSD) is determined from the calculation results of the following controls:

  • Torque sensitive control

Calculates connecting force of LSD according to torque input to the transfer.

  • Control for turning

Calculates reduction in connecting force of LSD based on the steering angle and vehicle speed.

This function improves turning performance within the specific vehicle speed range.

  • Control for slip

When the front or rear tires begin to slip, calculates the increase in connecting force of LSD according to the amount and time of the slip.

This function maintains road contact, improving drivability.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.