2011 Subaru Outback R PremiumFACTORY OEM SERVICE PROCEDURE

Cooperation Control

In this control, connecting force of LSD is determined in prior to normal control.

  1. Control during ABS operation

    During ABS operation, adjusts connecting force of LSD to the specified level. This function improves ABS control.

  2. Control during braking

    Adjusts connecting force of LSD to the specified level while the brake switch is ON with the throttle valve fully closed. This function improves stability during braking.

  3. Control during VDC and TCS operation

During VDC and TCS operation, adjusts connecting force of LSD to the specified level. This function improves VDC and TCS control.

The priority is as follows: A > B > C.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.