2010 Subaru Forester XS, AutomaticFACTORY OEM SERVICE PROCEDURE

General Information: Specifications: Forester: Engine

ENGINE SPECIFICATIONS

Model 2.5 L Non-turbo 2.5 L Turbo
Engine type Horizontally opposed, liquid cooled, 4-cylinder, 4-stroke gasoline engine
Valve system mechanism Method SOHC DOHC
Number of valves Intake 2/Exhaust 2
Bore x stroke mm (in) 99.5 x 79 (3.92 x 3.11)
Displacement cm3 (cu in) 2,457 (149.94)
Compression ratio 10.0 8.4
Ignition order 1-3-2-4
Idling speed [at neutral position on MT, or "P" or "N" position on AT] P RPM MT: 650
AT: 700
700
Maximum output kW (HP)/RPM 126 (170)/6,000 167 (224)/5,200
Maximum torque N.m (kgf-m, ft-lb)/RPM 229 (23.4,169)/4,400 307 (31.3,226) 72,800
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.