Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2009 Subaru Tribeca BaseFACTORY OEM SERVICE PROCEDURE

Front Oxygen (A/F) Sensor: Installation

CAUTION: If the lubricant adheres to the exhaust pipe, wipe it off with cloth to avoid emitting smoke or causing a fire.

Before installing front oxygen (A/F) sensor, apply anti-seize compound only to the threaded portion of front oxygen (A/F) sensor to make the next removal easier.
CAUTION: Never apply anti-seize compound to the protector of front oxygen (A/F) sensor.

Anti-seize compound:

NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent
Install the front oxygen (A/F) sensor.
Tightening torque:

21 N.m (2.1 kgf-m, 15.5 ft-lb)
- LH side
  
  Fig 1: Identifying Front Oxygen (A/F) Sensor (LH Side)
  Courtesy of SUBARU OF AMERICA, INC.
- RH side
  
  Fig 2: Identifying Front Oxygen (A/F) Sensor (RH Side)
  Courtesy of SUBARU OF AMERICA, INC.
Connect the connector of front oxygen (A/F) sensor.
- LH side
  
  Fig 3: Identifying Front Oxygen (A/F) Sensor (LH Side)
  Courtesy of SUBARU OF AMERICA, INC.
- RH side
  
  Fig 4: Identifying Front Oxygen (A/F) Sensor (RH Side)
  Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Connect the ground cable to battery.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty

Get a Free Quote

No obligation. See pricing before you book.