2009 Subaru Outback LimitedFACTORY OEM SERVICE PROCEDURE

Power Assisted System

  • Hose and tank
    Fig 1: Exploded View Of Hose And Tank
    G06339492Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: N.m (kgf-m, ft-lb) 

    T1: 7.5 (0.76, 5.53) 

    T2: 10 (1.02, 7.4) 

    T3: 13 (1.32, 9.6) 

    T4: 18 (1.84, 13.3) 

    T5: 40 (4.1, 29.5) 

  • Gearbox
    Fig 2: Exploded View Of Gearbox
    G06339493Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: N.m (kgf-m, ft-lb) 

    T1: 3.9 (0.4, 2.9) 

    T2: 9 (0.9, 6.6) 

    T3: 15 1.5, 10.8) 

    T4: 17 (1.7, 12.5) 

    T5: 20 (2.0, 14.8) 

    T6: 24 (2.4, 17.7) 

    T7: 25 (2.5, 18.4) 

    T8: 27 (2.75, 19.9) 

    T9: 37 (3.8, 27.3) 

    T10: 29 (3.0, 21.4) 

    T11: 60 (6.1, 44.1) 

    T12: 70 (7.1, 51.6) 

    T13: 85 (8.7, 62.7) 

    T14: 88 (9.0, 64.9) 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.