Outer Mirror Assembly: Inspection

Check that the rearview mirror moves properly when the battery voltage is applied to terminals.

• Model with side turn signal light
  Fig 1: Identifying Rear View Mirror Connector Terminal - Model With Side Turn Signal Light

  Courtesy of SUBARU OF AMERICA, INC.
  TERMINAL REFERENCE CHART
  
  

  Switch position	Terminal No.
  OFF	-
  UP	6 (+) and 3 (-) or 8 (-)
  DOWN	3 (+) or 8 (+) and 6 (-)
  LEFT	7 (+) and 3 (-) or 8 (-)
  RIGHT	3 (+) or 8 (+) and 7 (-)

• Model without side turn signal light
  Fig 2: Identifying Rear View Mirror Connector Terminal - Model Without Side Turn Signal Light

  Courtesy of SUBARU OF AMERICA, INC.
  RESISTANCE SPECIFICATION CHART
  
  

  Switch position	Terminal No.
  OFF	-
  UP	4 (+) and 2 (-) or 6 (-)
  DOWN	2 (+) or 6 (+) and 4 (-)
  LEFT	5 (+) and 6 (-) or 2 (-)
  RIGHT	6 (+) or 2 (+) and 5 (-)

  Replace the outer mirror assembly if defective.