Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

NOTE: Use a new gasket.

Install the tumble generator valve assembly onto intake manifold.
Tightening torque:

8.25 N.m (0.84 kgf-m, 6.1 ft-lb)

Fig 1: Identifying Tumble Generator Assembly Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the air intake duct to the intake manifold.
Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 2: Identifying Intake Duct From Intake Manifold
Courtesy of SUBARU OF AMERICA, INC.
Install the fuel pipe assembly and pressure regulator to intake manifold.
Tightening torque:

6.4 N.m (0.65 kgf-m, 4.7 ft-lb)

Fig 3: Identifying Fuel Pipes Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the fuel injector pipe LH.
Connect the fuel hose LH to the injector pipe, and tighten the clamp screw.
Tightening torque:

1.25 N.m (0.13 kgf-m, 0.94 ft-lb)

Fig 4: Identifying Fuel Hose Clamp
Courtesy of SUBARU OF AMERICA, INC.
Install the fuel injector pipe RH.
Connect the fuel hose RH to the injector pipe, and tighten the clamp screw.
Tightening torque:

1.25 N.m (0.13 kgf-m, 0.94 ft-lb)

Fig 5: Identifying Fuel Hose Clamp (RH Side)
Courtesy of SUBARU OF AMERICA, INC.
Install the engine harness onto intake manifold.
Install the harness bracket which holds the engine harness onto intake manifold.
Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 6: Identifying Harness Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Tighten the bolts which secure fuel injector pipe onto intake manifold.
Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)
- LH side
  
  Fig 7: Identifying Fuel Injector Pipe Onto Intake Manifold (LH Side)
  Courtesy of SUBARU OF AMERICA, INC.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply: