Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Subaru Outback i, StandardFACTORY OEM SERVICE PROCEDURE
Sedan Model
OUTBACK DIMENSION - SEDAN MODEL
| Model | 2.5 L SOHC | 3.0 L DOHC | ||
| Overall length | mm (in) | 4,730 (186.2) | ||
| Overall width | mm (in) | 1,770 (69.7) | ||
| Overall height (at C.W.) | mm (in) | 1,515 (59.6) | ||
| Compartment | Length | mm (in) | 1,900 (74.8) | |
| Width | mm (in) | 1,445 (56.9) | ||
| Height | mm (in) | 1,100 (43.3) | ||
| Wheelbase | mm (in) | 2,670 (105.1) | ||
| Tread | Front | mm (in) | 1,495 (58.9) | |
| Rear | mm (in) | 1,490 (58.7) | ||
| Minimum road clearance | mm (in) | 215 (8.5) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.