Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2007 Subaru Forester X, AutomaticFACTORY OEM SERVICE PROCEDURE

Fuel Filler Pipe: Disassembly

Move the clamp and disconnect the evaporation hose from the joint pipe.

Fig 1: Identifying Evaporation Hose Clamp
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install the joint pipe to the fuel filler pipe.

Fig 2: Identifying Fuel Filler Pipe Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the evaporation hose from fuel filler pipe.

Fig 3: Identifying Evaporation Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the shut valve from the fuel filler pipe. <Ref. to REMOVAL , Shut Valve. >

Chapter Navigation

Return to Chapter: Fuel Filler Pipe

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.