Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Subaru B9 Tribeca BaseFACTORY OEM SERVICE PROCEDURE
General Information: Specifications: Dimension
DIMENSION
| Overall length | mm (in) | 4,822 (189.8) | |
|---|---|---|---|
| Overall width | mm (in) | 1,878 (73.9) | |
| Overall height (at C.W.) | mm (in) | 1,686 (66.4) | |
| Compartment | Length | mm (in) | 2,493 (98.1) |
| Width | mm (in) | 1,475 (58.1) | |
| Height | mm (in) | 1,391 (54.8) | |
| Wheelbase | mm (in) | 2,749 (108.2) | |
| Tread | Front | mm (in) | 1,580 (62.2) |
| Rear | mm (in) | 1,578 (62.1) | |
| Minimum road clearance | mm (in) | 213 (8.4) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.