2007 Subaru B9 Tribeca BaseFACTORY OEM SERVICE PROCEDURE

Identification Number And Label Locations

The V.I.N. (Vehicle Identification Numbers) is used to classify the vehicle.

  • POSITIONING OF THE PLATE LABEL FOR IDENTIFICATION
    Fig 1: Identifying Positioning Of Plate Label For Identification
    G05345423Courtesy of SUBARU OF AMERICA, INC.
  • ENGINE
    Fig 2: Identifying Engine Serial Number And Engine Type (Crankcase Upper Side)
    G05345424Courtesy of SUBARU OF AMERICA, INC.
  • AUTOMATIC TRANSMISSION
    Fig 3: Identifying Automatic Transmission Type Label
    G05345425Courtesy of SUBARU OF AMERICA, INC.
  • REAR DIFFERENTIAL
    Fig 4: Identifying Rear Differential Label Location
    G05345426Courtesy of SUBARU OF AMERICA, INC.
  • MODEL NUMBER LABEL
    Fig 5: Identifying Model Number Label
    G05345427Courtesy of SUBARU OF AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.