2006 Subaru Outback i, AutomaticFACTORY OEM SERVICE PROCEDURE

General Information: Specifications: Outback: Engine

ENGINE - SPECIFICATIONS

Model 2.5 L SOHC 2.5 L DOHC turbo 3.0 L DOHC
Engine type Horizontally opposed, liquid cooled, 4-cylinder, 4-stroke gasoline engine Horizontally opposed, liquid cooled, 6-cylinder, 4-stroke gasoline engine
Valve arrangement Overhead camshaft
Bore x stroke mm (in) 99.5x79.0(3.917x3.110) 89.2x80.0(3.512x3.150)
Displacement cm3 (cu in) 2,457(149.9) 3,000(183.06)
Compression ratio 10.0 8.2 10.7
Ignition order 1-3-2-4 1-6-3-2-5-4
Idle speed at Park or Neutral position RPM 650 (MT)
700 (AT)
750 650
Maximum output kW (HP)/rpm 130(175)/6,000 186 (250)/6,000 186 (250)/6,600
Maximum torque N.m (kgf-m, ft-lb)/rpm 229(23.4, 16.9)/4,400 339 (34.5, 250)/3,600 297(30.3,219)74,200
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.