Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Subaru Baja Base, StandardFACTORY OEM SERVICE PROCEDURE
Remote Control Mirror Switch: Inspection
Move remote control mirror switch to each position and check continuity between terminals.
Change over switch left position:
REMOTE CONTROL MIRROR SWITCH CHANGE OVER SWITCH LEFT POSITION REFERENCE
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1 MΩ |
| UP | 7 and 4, 2 and 1 | Less than 1 Ω |
| DOWN | 7 and 2, 4 and 1 | Less than 1 Ω |
| LEFT | 9 and 4, 2 and 1 | Less than 1 Ω |
| RIGHT | 9 and 2, 4 and 1 | Less than 1 Ω |
Change over switch right position:
REMOTE CONTROL MIRROR SWITCH CHANGE OVER SWITCH RIGHT POSITION REFERENCE
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1 MΩ |
| UP | 6 and 4, 2 and 1 | Less than 1 Ω |
| DOWN | 6 and 2, 4 and 1 | Less than 1 Ω |
| LEFT | 8 and 4, 2 and 1 | Less than 1 Ω |
| RIGHT | 8 and 2, 4 and 1 | Less than 1 Ω |
If defective, replace the switch.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.