Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Subaru Baja Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Accelerator Pedal: Adjustment
- Check pedal stroke and free play by operating accelerator pedal by hand.
- If it is not within specified value, adjust it by turning accelerator cable lock nut.
Free play at pedal pad: l 0 - 4 mm (0 - 0.16 in)
Stroke at pedal pad: A 50 - 55 mm (1.97 - 2.17 in)
Accelerator cable lock nut tightening torque: 12 N.m (1.2 kgf-m, 9 ft-lb)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
