SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2005OUTBACK I, STANDARDREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENTATION/DRIVER INFOCOMBINATION METER SYSTEMINSPECTIONCOMMUNICATION ERROR DISPLAY
2005 Subaru Outback i, Standard

Communication Error Display

2005 Subaru Outback i, StandardSECTION Communication Error Display

When the following error code is displayed in the odo/trip meter, inspect the communication circuit since the communication malfunction is generated between each control module. < Ref. BASIC DIAGNOSTIC PROCEDURE , . >

Fig 1: Identifying Communication Error Display
G03833777Courtesy of SUBARU OF AMERICA, INC.
PROBLEM SYMPTOM CHART

Error code Remarks
PROBLEM SYMPTOM CHART

Er IU Malfunction in integrated unit
Er - Simultaneous malfunction of high/low speed CAN communication
Er HC Malfunction of high-speed CAN communication
Er LC Malfunction of low-speed CAN communication
Er EG EGI Communication malfunction
Er TC TCM Communication malfunction
Er Ab ABSCM/VDCCM Communication malfunction
Er SP ABSCM/VDCCM DTC information, vehicle speed pulse malfunction
Er SS Wheel speed data malfunction
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.