2005 Subaru Outback Limited, AutomaticFACTORY OEM SERVICE PROCEDURE

VIN Registration

  1. On the "Main Menu" display screen, select the {Each System Check} and press the [YES] key.
  2. On the "System Selection Menu" display screen, select the {Engine} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the "Engine Diagnosis" display screen, select the {VIN registration} and press the [YES] key.
  5. Perform the procedure as shown in the display.
NOTE: For detailed operation procedure, refer to " SUBARU SELECT MONITOR OPERATION MANUAL ".
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.