2005 Subaru Outback F4-2.5L SOHCFACTORY OEM SERVICE PROCEDURE

Engine Controls/Fuel System - Production Updates

NUMBER: 11-75-05
DATE: 07/13/05

APPLICABILITY:
2005MY Legacy and Outback Vehicles

SUBJECT:
Modification to Fuel Tank Pressure Sensor

INTRODUCTION

Factory service manual diagram




The purpose of this bulletin is to inform you of a running change in production. The Fuel Tank Sensor Control Solenoid Valve also referred to as Solenoid Valve Assembly has been eliminated. Also, the ECM logic, wiring harness and the connector to the valve have been changed accordingly. If the wrong combination of parts is used, DTC P1446 will be stored in memory.

Factory service manual diagram




Disclaimer

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.