Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
PDI Procedure: Notes
Follow the procedures shown in the table below.
Static Checks Just After Vehicle Receipt
| Step | Check point |
|---|---|
|
|
|
|
|
If the vehicle is about to be delivered to the customer, attach a room lamp fuse. |
|
If the vehicle is about to be delivered to the customer, connect the air conditioner harness. |
|
|
|
Check the child safety lock system operate normally. |
|
|
|
Operate the fuel lid opener to check that the fuel lid is unlocked normally. |
|
Check that the following accessories are provided:
|
|
Operate the hood lock release lever to check that the hood opens normally. |
|
Check the battery for any abnormal conditions such as rust and trace of battery fluid leaks. |
|
Check the fluid amount. |
|
Check the oil amount. |
|
|
|
Check the AT front differential oil amount. |
|
Check the coolant amount. |
|
Check the clutch fluid amount. |
|
Check the window washer fluid amount. |
|
Check that the hood is closed and latched securely. |
|
Check that the keyless entry system operates normally. |
|
Check that the security system operates normally. |
|
|
|
Check the seat belt installation conditions and functionality. |
|
Check that the wheel alignments are properly adjusted. |
Checks with the Engine Running
| Step | Check point |
|---|---|
|
Test mode connectors |
|
Start the engine and check that the engine starts smoothly. |
|
Check that the exhaust noise is normal and no leaks are found. |
|
Check that all the indicator and warning lights operate normally. |
|
Check that the clock operates normally. |
|
Check that the radio system operates normally. |
|
Check that the front accessory power supply socket operates normally. |
|
Check that the lighting systems operate normally. |
|
Check that the window washer system operates normally. |
|
Check that the wiper system operates normally. |
|
Check the power window for correct operations. |
Dynamic Test with the Vehicle Running
| Step | Check point |
|---|---|
|
Check that the foot brake operates normally. |
|
Check that the parking brake operates normally. |
|
Check the AT shift patterns are correct. |
|
Check that the heater & ventilation system operates normally. |
|
Check that the air conditioner operates normally. |
|
Check that the cruise control system operates normally. |
Checks after Dynamic Test
| Step | Check point |
|---|---|
|
Check that the ATF level is normal. |
|
Check that the power steering fluid level is normal. |
|
Check for fluid/oil leaks. |
|
Spray the vehicle with water and check for water leaks. |
|
|
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.
