2005 Subaru Baja Base, StandardFACTORY OEM SERVICE PROCEDURE

Read Freeze Frame Data For Engine. (OBD Mode)

  1. On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after displayed the information of engine type.
  4. On the << Engine Diagnosis >> display screen, select the {OBD System} and press the [YES] key.
  5. On the << OBD Menu >> display screen, select the {Freeze Frame Data} and press the [YES] key.
    • A list of the support data is shown in the following table.
      ENGINE (FREEZE FRAME DATA) SUPPORT DATA LIST

      Contents Display Unit of measure
      Diagnostic trouble code (DTC) for freeze frame data Freeze frame data DTC
      Air fuel ratio control system for bank 1 Fuel system for Bank 1 ON or OFF
      Engine load data Engine Load %
      Engine coolant temperature signal Coolant Temp. °C or °F
      Short term fuel trim by front oxygen (A/F) sensor Short term fuel trim B1 %
      Long term fuel trim by front oxygen (A/F) sensor Long term fuel trim B1 %
      Intake manifold absolute pressure signal Mani. Absolute Pressure mmHg or kPa or inHg or psig
      Engine speed signal Engine Speed RPM
      Vehicle speed signal Vehicle Speed km/h or MPH
    NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.