2004 Subaru Baja Base, AutomaticFACTORY OEM SERVICE PROCEDURE

A/T & M/T Control Systems: General Description: Component

  1. AT SELECT LEVER (EXCEPT SPORT SHIFT MODEL) 
    Fig 1: Exploded View Of AT Select Lever (Except Sport Shift Model) Components With Torque Specifications
    G00917870Courtesy of SUBARU OF AMERICA, INC.
  2. AT SELECT LEVER (SPORT SHIFT MODEL) 
    Fig 2: Exploded View Of AT Select Lever (Sport Shift Model) Components With Torque Specifications
    G00917871Courtesy of SUBARU OF AMERICA, INC.
  3. MT GEAR SHIFT LEVER 
    Fig 3: Exploded View Of MT Gear Shift Lever Components With Torque Specifications
    G00917872Courtesy of SUBARU OF AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.