Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Subaru Outback F4-2.5L SOHCFACTORY OEM SERVICE PROCEDURE
Coolant
Total engine coolant capacity
MT Approx 6.8 L (7.2 US qt, 6.0 Imp qt)
AT Approx 6.8 L (7.1 US qt, 5.9 Imp qt)
To prevent cooling system leaks, always add Genuine Subaru cooling system Conditioner (Part No. SOA635071) whenever the coolant is replaced.
The content of this article/image reflects the changes called out by TSB - 18-74-04-mu.
MT Approx 6.8 L (7.2 US qt, 6.0 Imp qt)
AT Approx 6.8 L (7.1 US qt, 5.9 Imp qt)
To prevent cooling system leaks, always add Genuine Subaru cooling system Conditioner (Part No. SOA635071) whenever the coolant is replaced.
The content of this article/image reflects the changes called out by TSB - 18-74-04-mu.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.