Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Release the fuel pressure. Refer to RELEASING OF FUEL PRESSURE , OPERATION, Fuel.
Open the fuel flap lid, and remove the fuel filler cap.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the two bolts which install the washer tank on the body.

Fig 2: Locating Bolts For Removal
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the front window washer motor.
Disconnect the connector from the rear gate glass washer motor.

Fig 3: Disconnecting Connector From Washer Motor
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the rear window glass washer hose from the washer motor, then plug the connection with a suitable cap.
Move the washer tank, and secure it away from the working area.

Fig 4: Identifying Washer Tank For Moving It Away Working Area
Courtesy of SUBARU OF AMERICA, INC.
Remove the spark plug cords from the spark plugs (#2 and #4 cylinders).

Fig 5: Identifying Spark Plug For Removal
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pipe protector LH.

Fig 6: Locating Bolts For Removing Fuel Pipe Protector LH
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the fuel injector.

Fig 7: Locating Connector For Disconnection
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which holds the injector pipe to the intake manifold.

Fig 8: Locating Bolts For Removal
Courtesy of SUBARU OF AMERICA, INC.