2003 Subaru Forester X, AutomaticFACTORY OEM SERVICE PROCEDURE

Identification & Specifications: Specifications: Engine

Engine Specifications Chart

Model 2.5L
Engine type Horizontally opposed, liquid cooled, 4-cylinder, 4-stroke gasoline engine
Valve arrangement Overhead camshaft type
Bore x Stroke mm (in) 99.5 x 79 (3.92 x 3.11)
Displacement cm3 (cu in) 2,457 (149.94)
Compression ratio 10.0 Β± 0.2
Firing order 1 - 3 - 2 - 4
Idle speed at Park/Neutral position rpm AT: 700 Β± 100
MT: 650 Β± 100
Maximum output kW (HP)/rpm 123 (165)/5,600
Maximum torque N.m (kgf-m, ft-lb)/rpm 226 (23.0, 166)/4,000
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.