Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Universal Joint: Inspection
Clean the disassembled parts with a cloth, and check for wear, damage, or any other faults. If necessary, repair or replace faulty parts.
Measurement of folding torque of universal joint is as shown in the figures.
Service limit:
- Maximum load; 5.49 N (0.56 kgf, 1.23 lb) or less
Service limit:
- Maximum load; 5.49 N (0.56 kgf, 1.23 lb) or less
Service limit:
- Maximum load; 8.43 N (0.86 kgf, 1.90 lb) or less
Service limit:
- Maximum load; 8.43 N (0.86 kgf, 1.90 lb) or less
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.