Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Abs Sequence Control With Select Monitor
- In the event of any trouble, the sequence control may not be operative. In such a case, activate the sequence control, referring to "ABS SEQUENCE CONTROL WITH DIAGNOSIS CONNECTOR".
< Ref. to , ABS SEQUENCE CONTROL WITH DIAGNOSIS CONNECTOR, OPERATION , ABS Sequence Controls. >
- When the diagnosis terminal is connected to the diagnosis connector, the sequence control will not operate.
- Connect select monitor to data link connector under driver's seat instrument panel lower cover.
- Turn ignition switch ON.
- Turn select monitor switch ON.
- Put select monitor to "BRAKE CONTROL" mode.
- When "Function check sequence" is selected, "ABS sequence control" will start.
- The message 'Press Brake Pedal Firmly' is displayed as follows:
- When using the brake tester, depress brake pedal with braking force of 981 N (100 kgf, 221 lb).
- When using the pressure gauge, depress brake pedal so as to make the pressure gauge indicate 3,432 kPa (35 kg/cm2 , 498 psi).
CAUTION: Do not depress the clutch pedal. - When the message "Press YES" is displayed, press << YES >> key.
- Operation points will be displayed on select monitor.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.