SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2002FORESTER BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSFUEL INJECTION (FUEL SYSTEMS)INTAKE MANIFOLDASSEMBLY
2002 Subaru Forester Base

Assembly

2002 Subaru Forester BaseSECTION Assembly
  1. Install fuel pipe assembly and pressure regulator, etc. to intake manifold.
  2. Tighten bolt which installs fuel pipes on intake manifold.

    Tightening torque:  5.0 N.m (0.51 kgf-m, 3.7 ft-lb)

    Fig 1: Installing Fuel Pipes
    G02861815Courtesy of SUBARU OF AMERICA, INC.
  3. Connect right side fuel hose to injector pipe, and tighten clamp screw.
    Fig 2: Connecting Right Side Fuel Hose
    G02861816Courtesy of SUBARU OF AMERICA, INC.
  4. Install fuel injector pipe.
    Fig 3: Installing Fuel Injector Pipe
    G02861817Courtesy of SUBARU OF AMERICA, INC.
  5. Connect left side fuel hose to injector pipe, and tighten clamp screw.
    Fig 4: Connecting Left Side Fuel Hose
    G02861818Courtesy of SUBARU OF AMERICA, INC.
  6. Connect air assist hoses.
    Fig 5: Connecting Air Assist Hoses
    G02861819Courtesy of SUBARU OF AMERICA, INC.
  7. Install fuel injectors.
    NOTE: Always use new O-rings.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.