Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2002FORESTER BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSFUEL INJECTION (FUEL SYSTEMS)FUEL FILLER PIPEASSEMBLY

2002 Subaru Forester Base

Fuel Filler Pipe: Assembly

2002 Subaru Forester BaseSECTION Assembly

Install shut valve on fuel filler pipe.
Tightening torque: 4.4 N.m (0.45 kg-m, 3.3 ft-lb)

Fig 1: Installing Shut Valve
Courtesy of SUBARU OF AMERICA, INC.
Connect evaporation hoses to shut valve.

Fig 2: Connecting Evaporation Hoses
Courtesy of SUBARU OF AMERICA, INC.
Connect evaporation hose to fuel filler pipe.

Fig 3: Connecting Evaporation Hose To Fuel Filler Pipe
Courtesy of SUBARU OF AMERICA, INC.
Connect evaporation hose to evaporation pipe.

Fig 4: Connecting Evaporation Hose To Evaporation Pipe
Courtesy of SUBARU OF AMERICA, INC.
Install evaporation pipe to fuel filler pipe.

Fig 5: Installing Evaporation Pipe To Fuel Filler Pipe
Courtesy of SUBARU OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.