Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2002FORESTER BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSANTI-THEFT SYSTEMSREMOVAL & INSTALLATIONSECURITY CONTROL MODULE
2002 Subaru Forester Base
Security Control Module
2002 Subaru Forester BaseSECTION Security Control Module
- Disconnect battery ground cable.
- Remove shift knob (MT model).
- Remove console cover (A) and front cover (B) while disconnecting connector. See Fig 1 .
- Disconnect connector from security control module.
- Remove bolt (A) and loosen bolt (B) without completely removing it. See Fig 2 .
- Remove security control module.
- Install security control module in reverse order of removal procedure.NOTE: Tighten bolts securely so that they do not come loose.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.