2001 Subaru Forester L, AutomaticFACTORY OEM SERVICE PROCEDURE

Transmission Control Module (TCM): Installation

  1. Install TCM to brake pedal bracket.

    Tightening torque:Β  7.4+/-2.0 N.m (0.75+/-0.2 kg-m, 5.4+/-1.4 ft-lb)

    Fig 1: Installing TCM To Brake Pedal Bracket
    G02003439
  2. Connect connectors to TCM.
  3. Install lower cover and then connect connector.
  4. Connect battery terminal.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.