Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Subaru Outback Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | ||||||
|---|---|---|---|---|---|---|---|---|
| Forester | ||||||||
| Camber (1) | ||||||||
| Front | -0.25 | -0.75 To 0.25 | ||||||
| Rear | -0.25 | -1.0 To 0.17 | ||||||
| Caster (1) | 2.83 | 2.08 To 3.58 | ||||||
| Toe-In (2) | ||||||||
| Front | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Rear | -0.1 (-2.5) | -0.16 To 0.04 (-4 To -1) | ||||||
| Toe-In (1) | ||||||||
| Front | 0 | -0.24 To 0.24 | ||||||
| Rear | -0.2 | -0.32 To 0.08 | ||||||
| Impreza 2.2L | ||||||||
| Camber (1) | ||||||||
| Front | 0 | -0.5 To 0.5 | ||||||
| Rear | -0.92 | -1.0 To -0.17 | ||||||
| Caster (1) | 3 | 2 To 4 | ||||||
| Toe-In (2) | ||||||||
| Front | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Rear | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Toe-In (1) | ||||||||
| Front | 0 | -0.24 To 0.24 | ||||||
| Rear | 0 | -0.24 To 0.24 | ||||||
| Impreza 2.5L | ||||||||
| Camber (1) | ||||||||
| Front | -0.42 | -0.92 To 0.08 | ||||||
| Rear | -1.17 | -1.92 To -0.42 | ||||||
| Caster (1) | 3.08 | 2.08 To 4.08 | ||||||
| Toe-In (2) | ||||||||
| Front | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Rear | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Toe-In (1) | ||||||||
| Front | 0 | -0.24 To 0.24 | ||||||
| Rear | 0 | -0.24 To 0.24 | ||||||
| Legacy Sedan | ||||||||
| Camber (1) | ||||||||
| Front | -0.08 | -0.58 To 0.42 | ||||||
| Rear | -0.5 | -1.25 To 0.25 | ||||||
| Caster (1) | 3.08 | 2.33 To 3.83 | ||||||
| Toe-In (2) | ||||||||
| Front | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Rear | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Toe-In (1) | ||||||||
| Front | 0 | -0.33 To 0.33 | ||||||
| Rear | 0 | -0.33 To 0.33 | ||||||
| Legacy Wagon | ||||||||
| Camber (1) | ||||||||
| Front | -0.08 | -0.58 To 0.42 | ||||||
| Rear | -0.33 | -1.08 To 0.42 | ||||||
| Caster (1) | 2.83 | 2.08 To 3.58 | ||||||
| Toe-In (2) | ||||||||
| Front | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Rear | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Toe-In (1) | ||||||||
| Front | 0 | -0.33 To 0.33 | ||||||
| Rear | 0 | -0.33 To 0.33 | ||||||
| Legacy Outback | ||||||||
| Camber (1) | ||||||||
| Front | 0.33 | -0.17 To 0.83 | ||||||
| Rear | -0.17 | -0.92 To 0.58 | ||||||
| Caster (1) | 2.67 | 1.92 To 3.42 | ||||||
| Toe-In (2) | ||||||||
| Front | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Rear | 0 (0) | -0.12 To 0.12 (-3 To 3) | ||||||
| Toe-In (1) | ||||||||
| Front | 0 | -0.33 To 0.33 | ||||||
| Rear | 0 | -0.33 To 0.33 | ||||||
|
||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.