SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2000FORESTER L, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONSQUICK-SERVICESERVICE INTERVALS & SPECIFICATIONS
2000 Subaru Forester L, Automatic

Service Intervals & Specifications

2000 Subaru Forester L, AutomaticSECTION Service Intervals & Specifications
REPLACEMENT INTERVALS

Component Interval (Miles)
Air Filter (1) 30,000
Automatic Transmission Fluid (2)(3) 30,000
Brake Fluid (3)(4) 30,000
Camshaft Timing Belt (2)(5) 30,000
Coolant (Radiator) (2) 30,000
Drive Belt(s) (5) 30,000
Fuel Filter (6)(7) 30,000
Oil & Filter (8) 7,500
Spark Plugs 30,000
Transmission & Differential (Front & Rear) Fluid (2)(3) 30,000
Valve Clearance 105,000
(1) If vehicle is operated in extremely dusty conditions, replacement should be performed more often.
(2) Inspect, correct or replace if necessary.
(3) If vehicle is operated under severe conditions, replace every 15,000 miles.
(4) If vehicle is operated in high humidity or mountainous areas, replace every 15,000 miles.
(5) Inspection recommended every 30,000 miles. Replacement required every 105,000 miles.
(6) If vehicle is operated in extremely cold or hot weather, contamination of filter may occur and replacement should be performed more often.
(7) If vehicle is operated under severe conditions, inspect every 7,500 miles.
(8) First replacement should occur at 3,000 miles. Second replacement should occur at 7,500 miles. Replace every 7,500 miles thereafter. If vehicle is operated under severe conditions, replace more often.
BELT ADJUSTMENT

Application Deflection - In. (mm)
New Belt
A/C .30-.34 (7.5-8.5)
Alternator & P/S .28-.35 (7.0-9.0)
Reused Belt
A/C .35-.39 (9.0-10.0)
Alternator & P/S .35-.43 (9.0-11.0)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.