Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Subaru SVX LSiFACTORY OEM SERVICE PROCEDURE
By-Pass Air Control Valve
- Turn ignition off. Unplug by-pass air control valve harness connector. By-pass air control valve is located near throttle body. Measure resistance between valve terminals No. 1 (White wire on mating connector) and No. 2 (Yellow/Red wire on mating connector). Resistance should be 9 ohms.
- Measure resistance between terminals No. 2 (Yellow/Red wire on mating connector) and No. 3 (Black wire on mating connector). Resistance should be 9 ohms. If resistance is not as specified, replace by-pass air control valve. See appropriate SELF-DIAGNOSTICS article for more detailed test procedures.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.