1990 Subaru XT 1.8 5FACTORY OEM SERVICE PROCEDURE

Wheel Alignment Specifications

WHEEL ALIGNMENT SPECIFICATIONS (JUSTY)

Application Preferred Range
Camber (1)
Front 1 1/16 -1/4 To 1 5/8
Rear - -
Caster (1) 2 1/2 1 1/2 To 3 1/2
Toe-In (1)
Front 3/32 (2) 1/32 To 1/8 (1 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 3/16 1/16 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY SEDAN - 2WD)

Application Preferred Range
Camber (1)
Front -1/4 -3/4 To 1/4
Rear 1/2 -1 1/2 To 1/2
Caster (1) 3 1/16 2 1/16 To 4 1/16
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY SEDAN - 4WD)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -1/2 -1 To 0
Caster (1) 3 2 To 4
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 -1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY WAGON - 2WD)

Application Preferred Range
Camber (1)
Front -1/4 -3/4 To 1/4
Rear -5/16 -1 5/16 To 11/16
Caster (1) 2 13/16 1 13/16 To 3 13/16
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 -1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LEGACY WAGON - 4WD)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -5/16 -1 5/16 To 11/16
Caster (1) 2 3/4 1 3/4 To 3 3/4
Toe-In (1)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/8 To 1/8 (-3 To 3)
Toe-In (2)
Front 0 -1/4 To 1/4
Rear 0 -1/4 To 1/4
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE - 2WD)

Application Preferred Range
Camber (1)
Front 3/4 0 To 1 1/2
Rear 0 -1/2 To 1/2
Caster (1) 2 1/2 1 3/4 To 3 1/4
Toe-In (1)
Front 1/16 (2) 1/32 To 1/8 (1 To 3)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/8 1/16 To 1/8
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE - 2WD)

Application Preferred Range
Camber (1)
Front 1 11/16 15/16 To 2 7/16
Rear 0 -1/2 To 1/2
Caster (1) N/A N/A
Toe-In (1)
Front 3/16 (5) 5/32 To 1/4 (4 To 6)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/4 3/16 To 5/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE WAGON - 2WD)

Application Preferred Range
Camber (1)
Front 1 1/4 To 1 3/4
Rear 0 -1/2 To 1/2
Caster (1) 2 1/16 1 5/16 To 2 13/16
Toe-In (1)
Front 1/16 (2) 1/32 To 1/8 (1 To 3)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/8 1/16 To 1/8
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (LOYALE WAGON - 4WD)

Application Preferred Range
Camber (1)
Front 1 3/4 1 To 2 1/2
Rear 0 -1/2 To 1/2
Caster (1) N/A N/A
Toe-In (1)
Front 3/16 (5) 5/32 To 1/4 (4 To 6)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
Toe-In (2)
Front 1/4 3/16 To 5/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (XT & XT6 - 2WD)

Application Preferred Range
Camber (1)
Front 0 -3/4 To 3/4
Rear 0 -3/4 To 3/4
Caster (1) 4 1/16 3 5/16 To 4 13/16
Toe-In (1)
Front 0 (0) -1/32 To 1/32 (-1 To 1)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-In (2)
Front 0 -1/16 To 1/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (XT & XT6 - 4WD)

Application Preferred Range
Camber (1)
Front 13/16 1/16 To 1 9/16
Rear -3/16 -15/16 To 9/16
Caster (1) 3 1/2 2 3/4 To 4 1/4
Toe-In (1)
Front -3/16 (-5) -1/4 To -5/32 (-6 To -4)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-In (2)
Front -1/4 -5/16 To -3/16
Rear 0 -1/8 To 1/8
(1) Measurement in degrees.
(2) Measurement in inches (mm).
Chapter Navigation
Return to Chapter: Wheel Alignment Specifications & Procedures
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.