1987 Subaru XT GL, AutomaticFACTORY OEM SERVICE PROCEDURE

Alignment Specifications

WHEEL ALIGNMENT SPECIFICATIONS (BRAT)

Application Specification
Front
Camber in Degrees
Fraction 2 27/64 +/- 3/4
Decimal 2.416 +/- .750
Caster in Degrees
Fraction -43/64 +/- 3/4
Decimal -.666 +/- .750
Toe-In in Inches
Fraction 3/16 +/- 1/32
Decimal .188 +/- .031
Toe-In in Degrees
Fraction 3/8 +/- 1/16
Decimal .375 +/- .063
Toe-Out in Turns
Inner 36 1/2°
Outer 35°
Steering Axis Inclination (SAI) (1)
Rear
Camber in Degrees
Fraction 21/64 +/- 3/4
Decimal .333 +/- .750
Caster in Degrees
Fraction N/A
Decimal N/A
Toe-In in Inches
Fraction 0 +/- 1/8
Decimal 0 +/- .125
Toe-In in Degrees
Fraction 0 +/- 1/4
Decimal 0 +/- .250
Toe-Out in Turns
Inner N/A
Outer N/A
Steering Axis Inclination (SAI) N/A
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (HATCHBACK - 2WD)

Application Specification
Front
Camber in Degrees
Fraction 1 1/2 +/- 3/4
Decimal 1.500 +/- .750
Caster in Degrees
Fraction -27/64 +/- 3/4
Decimal -.416 +/- .750
Toe-In in Inches
Fraction 5/16 +/- 5/16
Decimal .312 +/- .312
Toe-In in Degrees
Fraction 1/16 +/- 1/16
Decimal .063 +/- .063
Toe-Out in Turns
Inner 36 1/2°
Outer 35°
Steering Axis Inclination (SAI) (1)
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (HATCHBACK - 4WD)

Application Specification
Front
Camber in Degrees
Fraction 2 27/64 +/- 3/4
Decimal 2.416 +/- .750
Caster in Degrees
Fraction -1/2 +/- 3/4
Decimal -.500 +/- .750
Toe-In in Inches
Fraction 3/16 +/- 1/32
Decimal .188 +/- .031
Toe-In in Degrees
Fraction 3/8 +/- 1/16
Decimal .375 +/- .063
Toe-Out in Turns
Inner 36 1/2°
Outer 35°
Steering Axis Inclination (SAI) (1)
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (JUSTY)

Application Specification
Front
Camber in Degrees
Fraction 43/64 +/- 1
Decimal .666 +/- 1.0
Caster in Degrees
Fraction 2 1/2 +/- 1
Decimal 2.5 +/- 1.0
Toe-In in Inches
Fraction 5/64 +/- 3/64
Decimal .083 +/- .042
Toe-In in Degrees
Fraction 11/64 +/- 5/64
Decimal .166 +/- .083
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) (1)
Rear
Camber in Degrees
Fraction 1/2 +/- 1/2
Decimal .500 +/- .500
Caster in Degrees
Fraction N/A
Decimal N/A
Toe-In in Inches
Fraction 0 +/- 1/8
Decimal 0 +/- .125
Toe-In in Degrees
Fraction 0 +/- 1/4
Decimal 0 +/- .125
Toe-Out in Turns
Inner N/A
Outer N/A
Steering Axis Inclination (SAI) N/A
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (SEDAN & 3-DOOR - 2WD)

Application Specification
Front
Camber in Degrees
Fraction 3/4 +/- 3/4
Decimal .750 +/- .750
Caster in Degrees
Fraction 2 1/2 +/- 1/2
Decimal 2.500 +/- .500
Toe-In in Inches
Fraction 1/32 +/- 1/32
Decimal .031 +/- .031
Toe-In in Degrees
Fraction 1/16 +/- 1/16
Decimal .063 +/- .063
Toe-Out in Turns
Inner 36 1/2°
Outer 35°
Steering Axis Inclination (SAI) (1)
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (SEDAN - 4WD)

Application Specification
Front
Camber in Degrees
Fraction 1 43/64 +/- 3/4
Decimal 1.666 +/- .750
Caster in Degrees
Fraction 1 53/64 +/- 3/4
Decimal 1.833 +/- .750
Toe-In in Inches
Fraction 1/32 +/- 1/32
Decimal .031 +/- .031
Toe-In in Degrees
Fraction 1/16 +/- 1/16
Decimal .063 +/- .063
Toe-Out in Turns
Inner 36 1/2°
Outer 35°
Steering Axis Inclination (SAI) (1)
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (WAGON - 2WD)

Application Specification
Front
Camber in Degrees
Fraction 1 +/- 3/4
Decimal 1.0 +/- .750
Caster in Degrees
Fraction 2 1/8 +/- 3/4
Decimal 2.125 +/- .750
Toe-In in Inches
Fraction 1/32 +/- 1/32
Decimal .031 +/- .031
Toe-In in Degrees
Fraction 1/16 +/- 1/16
Decimal .063 +/- .063
Toe-Out in Turns
Inner 36 1/2°
Outer 35°
Steering Axis Inclination (SAI) (1)
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (WAGON - 4WD)

Application Specification
Front
Camber in Degrees
Fraction 1 43/64 +/- 3/4
Decimal 1.666 +/- .750
Caster in Degrees
Fraction 1 37/64 +/- 3/4
Decimal 1.583 +/- .750
Toe-In in Inches
Fraction 1/32 +/- 1/32
Decimal .031 +/- .031
Toe-In in Degrees
Fraction 1/16 +/- 1/16
Decimal .063 +/- .063
Toe-Out in Turns
Inner 36 1/3°
Outer 35°
Steering Axis Inclination (SAI) (1)
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (XT - 2WD)

Application Specification
Front
Camber in Degrees
Fraction 0 +/- 3/4
Decimal 0 +/- .750
Caster in Degrees
Fraction (1)
Decimal (1)
Toe-In in Inches
Fraction 0 +/- 1/8
Decimal 0 +/- .125
Toe-In in Degrees
Fraction 0 +/- 1/4
Decimal 0 +/- .250
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) (1)
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (XT - 4WD)

Application Specification
Front
Camber in Degrees
Fraction 0 +/- 3/4
Decimal 0 +/- .750
Caster in Degrees
Fraction (1)
Decimal (1)
Toe-In in Inches
Fraction 3/32 +/- 1/8
Decimal .09 +/- .125
Toe-In in Degrees
Fraction 3/16 +/- 1/4
Decimal .19 +/- .250
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) (1)
(1) Information not available.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.