1982 Subaru GLF Standard TransFACTORY OEM SERVICE PROCEDURE

Service Specifications

BELT ADJUSTMENT

Application (1) Deflection In. (mm)
Alternator Belt .51-.55 (13-14)
Power Steering Belt .59-.79 (15-20)
(1) Deflection is with 22 lbs. (10 kg) pressure applied midway on longest belt run.
REPLACEMENT INTERVALS

Component Miles
Oil Filter 7500
Air Filter 30, 000
Fuel Filter 15, 000
Spark Plugs 30, 000
FLUID CAPACITIES

Application Quantity
Crankcase (Includes Filter)
  1600 3.7 qts. (3.5L)
  1800 4.2 qts. (4.9L)
Cooling System
  1600 5.6 qts. (5.3L)
  1800 5.8 qts. (5.5L)
Man. Transaxle (SAE 85W-90)
  2-WD 2.9 qts. (2.7L)
  4-WD 3.2 qts. (3.0L)
Auto. Transaxle (Dexron) 5.9-6.3 qts. (5.6-6.0L)
Differential (SAE 85W-90)
  Front 2.6 pts. (1.2L)
  Rear (4-WD) 1.6 pts. (.8L)
Fuel Tank
  Hatchback
    2-WD 13.2 gals. (50.0L)
    4-WD 11.9 gals. (45.0L)
  All Other Models
    2-WD 15.8 gals. (59.8L)
    4-WD 14.5 gals. (54.9L)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.