Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Smart Fortwo Electric Drive, 2D ConvertibleFACTORY OEM SERVICE PROCEDURE
Remove/Install Injection System Control Unit - AR07.08-P-7008SR
ENGINE 281 in MODEL 453
Shown on model 453.0
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Perform initial startup of ME-SFI [ME] control unit (N3/10) | When replacing the ME-SFI [ME] control unit (N3/10). | |
| AD00.00-P-2000-06SR | |||
| 2 | Switch off ignition and remove transmitter key | ||
| 3 | Remove right paneling in cargo area | Engine 281 in model 453.4 | AR68.30-P-4700SRC |
| Engine 281 in model 453.0 | AR68.30-P-4800SR | ||
| Engine 281 in model 453.3 | AR68.30-P-4800SRA | ||
| 4 | Release and disconnect electrical connection (1) | ||
| 5 | Release and disconnect electrical connection (2) | ||
| 6 | Release and disconnect electrical connection (3) | ||
| 7 | Remove screw/bolts (4) and remove from ME-SFI [ME] control unit (N3/10) | ||
| 8 | Install in the reverse order |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
