2008 Smart Fortwo PureFACTORY OEM SERVICE PROCEDURE

Electrical Component Locator: Splices

SPLICES LOCATION

Component Location
Z3/17 Near center console. See Figure.
Z3/24 Left side of vehicle. See Figure.
Z3/44 Near center console. See Figure.
Z5/1 At right front door. See Figure.
Z6/16 Top left "B" pillar. See Figure.
Z6/35 Left door assembly. See Figure.
Z6/36 Right door panel. See Figure.
Z7/3 Left end of rear bumper. See Figure.
Z7/4 Left end of rear bumper. See Figure.
Z7/5 Left end rear bumper. See Figure.
Z7/24 Bottom of left door. See Figure.
Z7/35 Bottom of left door. See Figure.
Z7/36 Bottom of left door. See Figure.
Z19/1 Left side of vehicle. See Figure.
Z19/2 Left side of vehicle. See Figure.
Z20 Left rear wheel well. See Figure.
Z20/29 Left front vehicle. See Figure.
Z20/73 Left front of vehicle. See Figure.
Z21/6 Left side of vehicle. See Figure.
Z28/18 Left side of dash. See Figure.
Z29/1 Left side of vehicle. See Figure.
Z29/4 Left side of vehicle. See Figure.
Z30/6 Left side of vehicle. See Figure.
Z37/3 Near center console. See Figure.
Z37/4 Near center console. See Figure.
Z37/4 Near center console. See Figure.
Z37/41 Left side of vehicle. See Figure.
Z37/42 Left side of vehicle. See Figure.
Z40 Near center console. See Figure.
Z45 Near center console. See Figure.
Z51/6 Left door panel. See Figure.
Z52/12 Left door assembly. See Figure.
Z54/16 Left rear of vehicle. See Figure.
Z54/17 Left rear of vehicle. See Figure.
Z78 Left side of dash. See Figure.
Z78/1 Left side of dash. See Figure.
Z81 Left side of dash. See Figure.
Z83/11 Left front of vehicle. See Figure.
37/2 Near center console. See Figure.
37/5 Near center console. See Figure.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.