Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Scion xD Automatic TransFACTORY OEM SERVICE PROCEDURE
Service Data
| Oil pressure switch | Oil pressure | Standard | Idling | 25 kPa (0.3 kgf/cm2 , 4.3 psi) or more |
| 3000 RPM | 150 to 400 kPa (1.6 to 4.1 kgf/cm2 , 21.8 to 58.0 psi) | |||
| Oil pump rotor | Side clearance | Standard | 0.030 to 0.080 mm (0.0012 to 0.0031 in.) | |
| Maximum | 0.16 mm (0.0063 in.) | |||
| Tip clearance | Standard | 0.08 to 0.16 mm (0.0032 to 0.0063 in.) | ||
| Maximum | 0.35 mm (0.0138 in.) | |||
| Body clearance | Standard | 0.12 to 0.19 mm (0.0048 to 0.0074 in.) | ||
| Maximum | 0.325 mm (0.0128 in.) | |||
| Engine oil pressure switch assembly | Standard resistance | 1 - switch body | Idling | 10 Ξ© or higher |
| Engine stopped | Below 3 Ξ© | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.