Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Starter assembly	Specified current		90 A
Magnet switch body	Standard resistance	Terminal 50 - Terminal C	Below 1 Ω
Magnet switch body	Standard resistance	Terminal 50 - Switch body	Below 2 Ω
Starter armature assembly	Standard resistance	Segment - Segment	Below 1 Ω
	Standard resistance	Commutator - Armature coil core	10 kΩ or higher
	Commutator depth	Specified depth	3.1 mm (0.122 in.)
	Commutator depth	Maximum depth	3.8 mm (0.150 in.)
Starter commutator end frame assembly	Brush length	Specified length	9.0 mm (0.354 in.)
	Brush length	Minimum length	4.0 mm (0.157 in.)
	Standard resistance		10 kΩ or higher
Starter relay	Standard resistance	3 - 5 (When battery voltage absent)	10 kΩ or higher
Starter relay	Standard resistance	3 - 5 (When battery voltage applied to terminals 1 and 2)	Below 1 Ω
ACC	Standard resistance	3 - 4	Below 1 Ω
		3 - 4	10 kΩ or higher (when battery voltage applied to terminals 1 and 2)
		3 - 5	Below 1 Ω (when battery voltage applied to terminals 1 and 2)
		3 - 5	10 kΩ or higher
Ignition switch assembly	Standard resistance	LOCK: Between all terminals	10 kΩ or higher
		ACC: 2 - 4	Below 1 Ω
		ON: 1 - 2 - 4
		ON: 5 - 6
		START: 1 - 3 - 4
		START: 5 - 6 - 7

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Service Data