2013 Scion tC Automatic TransFACTORY OEM SERVICE PROCEDURE

VSC Off Switch: Removal: Removal

  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  . Refer to REMOVAL - Step 1
  2. REMOVE CONSOLE BOX  . Refer to REMOVAL - Step 2
  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 3
  4. REMOVE VSC OFF SWITCH 
    1. Detach the 2 claws and remove the VSC OFF switch from the front upper console panel.
      Fig 1: Identifying VSC Off Switch And Detaching 2 Claws
      GTY314118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Protective Tape

      HINT: 

      Tape the screwdriver tip before use.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.