Front Speed Sensor: Removal: Removal

HINT: 

• Use the same procedure for the RH and LH sides.
• The following procedure is for the LH side.

1. REMOVE FRONT WHEEL 
2. REMOVE FRONT FENDER LINER LH 

   HINT: 

   It is not necessary to fully remove the fender liner. Partially remove it so that the speed sensor connector can be disconnected in a later step.

3. REMOVE FRONT SPEED SENSOR LH 
   1. Remove the 2 front speed sensor wire harness clamps and disconnect the front speed sensor connector.
      Fig 1: Identifying LH Speed Sensor Connector And Wire Harness Clamps

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bolt and No. 2 sensor clamp from the body.
      Fig 2: Identifying Speed Sensor Harness Bracket Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION
      
      

      *1	No. 2 Sensor Clamp

   3. Remove the bolt, No. 1 sensor clamp and front brake flexible hose together from the front shock absorber assembly.
      Fig 3: Identifying No. 1 Sensor Clamp And Front Brake Flexible Hose Bracket Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION
      
      

      *1	No. 1 Sensor Clamp
      *2	Front Brake Flexible Hose

   4. Remove the clamp from the front shock absorber assembly.
   5. Remove the bolt and front speed sensor from the steering knuckle.
      Fig 4: Identifying Front Speed Sensor And Steering Knuckle

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002