2012 Scion tC L4-2.5L (2AR-FE)FACTORY OEM SERVICE PROCEDURE

Spark Plug: Specifications






Maximum electrode gap for used spark plug 1.3 mm (0.0512 in.)
If the gap is more than the maximum, replace the spark plug

Electrode gap for new spark plug 1.0 to 1.1 mm (0.0394 to 0.0433 in.)

Spark plug 25 Nm (255 kgf-cm, 18 ft-lbf)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.