Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Scion tC Automatic TransFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications: tC
tC
| Measurement | Minimum | Preferred | Maximum |
|---|---|---|---|
| Left Front Caster (°) | 5.25 | 6 | 6.75 |
| Right Front Caster (°) | 5.25 | 6 | 6.75 |
| Left Front Camber (°) | -0.97 | -0.22 | 0.53 |
| Right Front Camber (°) | -0.97 | -0.22 | 0.53 |
| Front Toe (°) | -0.13 | 0.13 | 0.38 |
| Left SAI (°) | 12.28 | 12.28 | 12.28 |
| Right SAI (°) | 12.28 | 12.28 | 12.28 |
| Left Rear Camber (°) | -1.9 | -1.15 | -0.4 |
| Right Rear Camber (°) | -1.9 | -1.15 | -0.4 |
| Rear Toe (°) | 0.04 | 0.12 | 0.2 |
| Thrust Angle (°) | 0 | 0 | 0 |
| Left Toe Out, Inward (°) | 0 | 0 | 0 |
| Right Toe Out, Inward (°) | 0 | 0 | 0 |
| Left Toe Out, Outward (°) | 0 | 0 | 0 |
| Right Toe Out, Outward (°) | 0 | 0 | 0 |
| Left Max Turn, Inward (°) | 34.93 | 36.93 | 38.93 |
| Right Max Turn, Inward (°) | 34.93 | 36.93 | 38.93 |
| Left Max Turn, Outward (°) | 31.77 | 31.77 | 31.77 |
| Right Max Turn, Outward (°) | 31.77 | 31.77 | 31.77 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.