2009 Scion xB AutomaticFACTORY OEM SERVICE PROCEDURE

System Outline

* When the driver's door is opened (Front door courtesy switch LH : ON) while the key is still inserted in the ignition key cylinder (Unlock warning switch : ON) and the ignition switch is OFF (LOCK), the main body ECU sends signals to the combination meter through CAN communication. The meter computer responds to the signals by sounding the multi buzzer intermittently in order to warn the driver that the ignition key has not been removed.

* The buzzer stops when the ignition switch is turned ON, the driver's door is closed or the key is pulled out.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.