2009 Scion xB AutomaticFACTORY OEM SERVICE PROCEDURE

Windshield Glass: Installation

  1. CLEAN WINDSHIELD GLASS 
    1. Using a scraper, remove the damaged stoppers, dam and adhesive from the windshield glass.
      NOTE: Be careful not to damage the windshield glass.
    2. Clean the outer edge of the windshield glass with a non-residue solvent.
      Fig 1: Cleaning Outer Circumference Of Back Door Glass
      G04833882Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.